Kodak X-Omat MULTILOADER 300 Plus Service Manual page 126

SM 3058-6
77.
Do a SCAN RUN.
Press 3 times BACKSPACE
Select LEAVE COMPONENT TEST .................................................................. press ENTER
Select CHANGE ML300 DATA......................................................................... press ENTER
Select CHANGE PARAMETER ......................................................................... press ENTER
Select SCAN RUN .............................................................................................. press ENTER
Select NEARLY EMPTY ....................................................................................... press ENTER
Select STORE PARAMETERS ............................................................................ press ENTER
Select RETURN TO MAIN MENU ...................................................................... press ENTER
Select COMPONENT TEST ................................................................................ press ENTER
Select MAGAZINE MOTORS ............................................................................ press ENTER
78.
Proceed with step 81.
79.
Rotate out the FILM POCKET SUCKER BAR.
Select BACKWARD ............................................................................................ press ENTER
80.
Press Backspace to go back to the screen TEST MAGAZINE MOTORS.
81.
Insert the MAGAZINE into position 1.
82.
Check that the BLOWPIPES have the correct distance of 0-1 mm to the wall of
MAGAZINE 1.
Select STEPPER MOTOR FILM POCKET M10 ................................................. press ENTER
Select MOVE TO LEVELS/HOME POSITION .................................................. press ENTER
Select Move to MAGAZINE 1 ......................................................................... START
Press BACKSPACE twice to come back to screen TEST MAGAZINE MOTORS
Select FILM PICK UP MAGAZINE M15 ........................................................... press ENTER
Select FORWARD
Note
Find a compromise between MAGAZINE LEVEL 1 and 3.
83.
If the distance is not correct, go back to step 75 and alter the MAGAZINE LEVEL
ADJUSTMENT.
84.
Rotate out the FILM POCKET SUCKER BAR.
Select BACKWARD
9/98 3-56
ADJUSTMENTS
KODAK AG, Stuttgart