Kodak X-Omat MULTILOADER 300 Plus Service Manual page 48

SM 3058-6
5
. Slide the right-hand CLUTCH DISK to the right and take out the defective CLUTCH
SPRING.
6
. Lubricate the RING and the right-hand CLUTCH DISK as shown to avoid wear and
install the new CLUTCH DISK.
7
. Slide the right-hand CLUTCH DISK, the right-hand FILM REJECTER and the
COLLAR to the left. Tighten the SET SCREW.
8
. Ensure that the CLUTCH SPRING is mounted as shown.
9/98
lubricate this surface
RING
CLUTCH SPRING
lubricate this surface
figure 2-33
figure 2-34
2-36
REPLACEMENTS
right-hand
CLUTCH DISK
KODAK AG, Stuttgart