Frame Levelling - Kodak X-Omat MULTILOADER 300 Plus Service Manual

SM 3058-6

FRAME LEVELLING

PURPOSE:
This adjustment makes sure, the PROCESSOR will roll out smoothly. If the FRAME is not
levelled it may be possible that the MAGAZINE SUCKER BAR is no longer parallel to the
MAGAZINES. This may result in FILM PICKUP problems. Also it is possible that a
MAGAZINE stays open.
1
. Take out all MAGAZINES.
Note
The old style FILM CHUTE has always to be fixed with 4 SCREWS. The new style FILM
CHUTE is only fixed with one SCREW and can be rotated out.
2
. Make sure that the FILM CHUTE is in the correct place and that it is fixed with all 4
MOUNTING SCREWS to the FRAME.
3
. Place the LEVEL onto the BASE PLATE of the MAGAZINE CHAMBER.
MOUNTING
SCREW
FILM CHUTE
old style
FILM
CHUTE
MOUNTING
SCREW
9/98
MOUNTING SCREW
figure 3-1
3-2
ADJUSTMENTS
MOUNTING
SCREW
MOUNTING
SCREW
KODAK AG, Stuttgart