Kodak X-Omat MULTILOADER 300 Plus Service Manual page 116

SM 3058-6
41.
Check that all SUCKERS are parallel on the FILM.
42.
If the SUCKERS are not plane on the FILM proceed with step 43, else proceed
with step 44.
Note
The SOLENOID Y14 is still energised.
43.
Loosen the 2 MOUNTING SCREWS of the TILTING MAGAZINE SUCKER BAR
SOLENOID Y14. Move the SOLENOID up or down as required and tighten the
MOUNTING SCREWS.
MOUNTING
SCREWS
SOLENOID Y14
9/98
not correct correct
figure 3-43
figure 3-44
3-46
ADJUSTMENTS
not correct
KODAK AG, Stuttgart