Kodak X-Omat MULTILOADER 300 Plus Service Manual page 76

SM 3058-6
4
. If the distance is not correct, do the following:
5
. Remove the DISPLAY PANEL.
6
. Remove the CASSETTE REGISTRATION MECHANISM.
CASSETTE REGISTRATION
MECHANISM
NOTE
The PANEL may block the
function of the CASSETTE
REGISTRATION MECHA-
NISM, if the MECHANISM
is mounted too high.
7
. Elongate the 2 MOUNTING HOLES with a small file. This allows to move the
complete CASSETTE REGISTRATION MECHANISM up or down to adjust it to the
correct level.
8
. Install the CASSETTE REGISTRATION MECHANISM. Make sure that the level of
the CASSETTE REGISTRATION ROLLER is ≥ 3mm above the level of the
TRANSPORT ROLLER.
9
. Check that no cycle is started, when a CASSETTE is pulled out of the ML300.
10.
Check that the CASSETTE REGISTRATION SENSOR B2 is working correctly with
all PANELS mounted.
9/98
figure 3-5
3-6
ADJUSTMENTS
Elongate these 2 holes with a small file
KODAK AG, Stuttgart