Kodak X-Omat MULTILOADER 300 Plus Service Manual page 39

REPLACEMENTS
9
. Take off the GEAR.
10
. Take out the MOTOR MOUNTING SCREWS.
11
. Install the new MAGAZINE OPENER MOTOR.
12
. Move the MAGAZINE OPENER MOTOR to the "CLOSED" position.
13
. Fasten the MOUNTING SCREWS.
14.
Do the MAGAZINE OPENER MOTOR ADJUSTMENT as described in the section
ADJUSTMENT PROCEDURES.
FUNCTION TEST.
No special FUNCTION TEST is necessary. The function of MOTOR M14 was tested during
the adjustments.
KODAK AG, Stuttgart 2-27
SM 3058-6
9/98