Film Release - Kodak X-Omat MULTILOADER 300 Plus Service Manual

SM 3058-6

FILM RELEASE

Purpose:
The FILM RELEASE FLAP in the FILM CHUTE must close completely as shown. It the FILM
RELEASE FLAP is not closing as shown, it may result in scratches on the FILM or in a film
jam in the FILM CHUTE.
Purpose:
To hold the FILM securely back until it can be delivered to the PROCESSOR.
9/98
This is the correct position of
the FILM RELESE FLAP when
figure 3-71
3-82
ADJUSTMENTS
it is closed
-
5
10
~
~
KODAK AG, Stuttgart