Kodak X-Omat MULTILOADER 300 Plus Service Manual page 107

ADJUSTMENTS
Note
Start the SERVICE PROGRAM.
Select SERVICE MODE from the GLOBAL MENU ....................................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed............................................ press ENTER
UNIT DATA are displayed ................................................................................ press ENTER
Select COMPONENT TEST from the MAIN MENU ....................................... press ENTER
Select SOLENOIDS ............................................................................................. press ENTER
Select TILTING MAGAZINE SUCKER BAR Y14............................................... press ENTER
Select ON
14.
Manually move the FILM POCKET SUCKER BAR close to the CASSETTE in
MAGAZINE POSITION 3.
15.
Check that the 4 MAGAZINE SUCKERS are parallel to the metal edge of the
CASSETTE. This is best seen from the front.
You cannot compensate with this adjustment for a bent FILM POCKET SUCKER BAR. Do
this adjustment only if the complete FILM POCKET ASSEMBLY is not parallel to the
CASSETTE.
KODAK AG, Stuttgart
METAL EDGE OF THE CASSETTE
figure 3-34
3-37
SM 3058-6
9/98