Kodak X-Omat MULTILOADER 300 Plus Service Manual page 165

ADJUSTMENTS
3
. Loosen both SENSOR MOUNTING SCREWS.
4
. Turn the GAIN ADJUSTMENT SCREW of SENSOR B24 fully clockwise.
5
. Move the SENSOR up and down until its infrared beam is reflected by the reflective
foil. This turns the INDICATOR LED green.
6
. Fasten both SENSOR MOUNTING SCREWS.
KODAK AG, Stuttgart
MOUNTING SCREW (2)
INDICATOR LED
INFRARED BEAM
REFLECTIVE STICKER
HOLDING FINGER MOTOR
GAIN ADJUSTMENT
SENSOR B24
figure 3-84
3-95
SM 3058-6
SCREW
9/98