Kodak X-Omat MULTILOADER 300 Plus Service Manual page 215

ML300 SN > 3000
PANELS
It is now possible to remove the PANELS more easily and quicker.
To take off a SIDE PANEL use the following procedure:
1
. Take off the TOP COVER.
2
. Take off the REAR PANEL. There are just 2 SCREWS. The bottom of the REAR
PANEL rests on 2 HOLDING BRACKETS.
3
. Take out the SIDE PANEL MOUNTING SCREWS.
4
. Shift the SIDE PANEL to the rear to disengage it from their LOCATORS.
5
. Lift the PANEL out of the 2 bottom MOUNTING BRACKETS.
KODAK AG, Stuttgart
figure 8-8
8-7
SM 3058-6
9/98