SM 3058-6
CASSETTE AREA
INPUT FLAP
PURPOSE:
This adjustment ensures that the INPUT FLAP is closed light-tight when a CASSETTE is fed
into the MULTILOADER 300.
1
.
Take off the PANEL.
2
.
Take off the FRONT PANEL with the DISPLAY.
3
.
Close the INPUT FLAP.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU ....................................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed............................................ press ENTER
Select COMPONENT TEST from the MAIN MENU ....................................... press ENTER
Select CASSETTE MOTORS ............................................................................... press ENTER
Select CASSETTE INPUT FLAP M1.................................................................... press ENTER
Select CLOSE
4
.
Adjust SENSOR B4/C_IF_EC INPUT FLAP CLOSED until the INPUT FLAP rests
properly in the BLOCK GROOVE.
BLOCK GROOVE
9/98
SENSOR B3/C_IF_EO
figure 3-3
3-4
ADJUSTMENTS
SENSOR
B4/C_IF_EC
KODAK AG, Stuttgart