Kodak X-Omat MULTILOADER 300 Plus Service Manual page 106

SM 3058-6
7
. Check that the second counterweight is also approx. level with the top of the
GUIDE.
8
. If necessary, move the CHAIN to the correct position on the GEAR.
COUNTER
WEIGHT left
Be careful not to damage the MAGAZINE SIZE PCB, when pushing in the CASSETTE.
!
Caution
9
. Insert a large CASSETTE (min. 37 cm long ) with the tube side up and the metal
edge towards the FILM POCKET into magazine position 3. The CASSETTE is just
used as a gauge.
1
0. Carefully move the FILM POCKET up above level 3.
11.
Carefully rotate the FILM POCKET SUCKER BAR ARM into its fully upright
position.
12.
Switch on the ML300.
Do not leave the SOLENOID Y14 switched on for a long time. It becomes very hot.
13.
Tilt the SOLENOID SUCKER BAR TILTING Y14.
9/98
GUIDE RAIL
figure 3-33
3-36
ADJUSTMENTS
COUNTER
WEIGHT right
KODAK AG, Stuttgart