Kodak X-Omat MULTILOADER 300 Plus Service Manual page 101

ADJUSTMENTS
7
. Interrupt the infrared beam with a FILM. The voltage should now be > 1.9 V. Check
this with all different types of customer films.
Note
The position of the MIRROR is not adjustable.
8
. If the voltage is not correct, reposition SENSOR B20.
9
. Switch off the XML 300.
10.
Take out the JUMPER between PIN 1 and PIN 3 at the SOCKET of U37.
11.
Install U37.
12.
Check the position of JUMPER A8x50. The JUMPER has to be between 1 and 2.
KODAK AG, Stuttgart
figure 3-29
3-31
SM 3058-6
9/98