Kodak X-Omat MULTILOADER 300 Plus Service Manual page 96

SM 3058-6
1
. Take off the TOP COVER.
2
. Start the SENSOR TEST.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU ....................................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed............................................ press ENTER
UNIT DATA are displayed ................................................................................ press ENTER
Select COMPONENT TEST from the MAIN MENU ....................................... press ENTER
Select SENSORS .................................................................................................. press ENTER
Select SENSOR TEST WITH SOUND.................................................................. press ENTER
3
. Manually actuate SENSOR B11/C_CE_CL CASSETTE CENTRED LEFT and fix it in
position with a piece of tape.
4
. With a CASSETTE carefully actuate SENSOR B12/C_CE_CR CASSETTE
RIGHT.
5 SENSOR B12 has to be actuated when the CASSETTE is 1.5 ± 0.5 mm away from
.
the right-hand CENTRING BAR.
6
. If the distance is not correct, change the position of B12.
7
. Manually actuate SENSOR B12/C_CE_CR CASSETTE CENTRED RIGHT and fix it in
position with a piece of tape.
8
. Take off the tape from SENSOR B11.
9
. With a CASSETTE carefully actuate SENSOR B11/C_CE_CL CASSETTE
CENTRED LEFT.
10. SENSOR B11 has to be actuated when the CASSETTE is 1.5 ± 0.5 mm away
from the right-hand CENTRING BAR.
11.
If the distance is not correct, change the position of B11.
12.
Take off the tape from SENSOR B12.
13.
Start the option CASSETTE LENGTH of the SCREEN PARAMETER.
Press 3 times BACKSPACE
Select LEAVE COMPONENT TEST ................................................................... press ENTER
Select CHANGE ML300 DATA from the MAIN MENU ............................... press ENTER
9/98 3-26
ADJUSTMENTS
CENTRED
KODAK AG, Stuttgart