Replacement Of Solenoid Cassette Sucker Bar Tilting Y7 - Kodak X-Omat MULTILOADER 300 Plus Service Manual

SM 3058-6
FUNCTION TEST
1
. Check that the CONVEYOR is seated properly. It must be as far as possible to the
front (e.g. to the INPUT FLAP).
2
. Run a TEST CYCLE.
3
. Check that the FILM is picked up from the CASSETTE.
4
. Check that the CASSETTE SUCKER BAR CARRIAGE moves freely forward and
backward.
5
. Check that the FILM is transported correctly into the FILM CHUTE.
6
. Use various FILM SIZES.

REPLACEMENT OF SOLENOID CASSETTE SUCKER BAR TILTING Y7

1
. Do PROCEDURE "REMOVAL OF CONVEYOR".
2
. Put CARRIAGE ASSEMBLY upside down.
3
. Pull CASSETTE SUCKER BAR carefully forward to get access to the SOLENOID
CASSETTE SUCKER BAR TILTING Y7.
SOLENOID
9/98
NUT
figure 2-52
2-54
REPLACEMENTS
OLD VERSION
PIN
KODAK AG, Stuttgart