Table of Contents
Advertisement
DryView 8100 Laser Imager User Guide
Loading/Unloading Film
1. To access the film cartridge, press the Open Door key on the Local Panel. This
will close the film cartridge cover and then unlock the front door.
2. Open the front door to access the film cartridge.
3. To remove the film cartridge, lift the edge of the cartridge slightly, then pull the
cartridge out of the imager.
4. To install the film cartridge, insert it into the cartridge slot as shown in Figure 3-6.
5. Slide the cartridge into the imager.
6. Close the front door.
Film Cartridge is inserted
long edge first
Perforations
to the left
Figure 3-6. Loading and Unloading Film
3-10
8100–30C
8754020
2000 March Rev. B
Advertisement
Table of Contents
