Kodak X-Omat MULTILOADER 300 Plus Service Manual page 119

ADJUSTMENTS
Note
·
If the SUCKER BAR ARM is too far to the left, SCREW 2 from the COLLAR has also to
be loosened.
·
Ensure that the position of the MAGAZINE SUCKER BAR in relation to the 3 mm
reference line is not changed (see step 40).
56.
If they are too far to the left or to the right, loosen SCREW 1 and carefully move
the SUCKER BAR ARM in the desired direction. Make sure the SUCKER BAR does not
interfere with the DOUBLE FILM DETECTOR.
KODAK AG, Stuttgart
SCREW 1 SCREW 2
figure 3-48
3-49
SM 3058-6
9/98