Cassette Blow Pipe Holder - Kodak X-Omat MULTILOADER 300 Plus Service Manual

SM 3058-6
12.
Exit the SERVICE MODE.
Press 3 times BACKSPACE
Select LEAVE THE COMPONENT TEST............................................................ press ENTER
Select QUIT ML300 SERVICE MODE ............................................................... press ENTER
Select Quit the program ................................................................................. press ENTER

CASSETTE BLOW PIPE HOLDER

Purpose:
To make sure that the BLOW PIPE HOLDER moves in the indicated directions.
1
. Check the movement of the BLOW PIPE HOLDERS in the direction of the arrows. Be
sure that the spring function is correct.
2
. If necessary, repair or replace the damaged parts.
9/98
figure 3-11
3-12
ADJUSTMENTS
This part must be straight
KODAK AG, Stuttgart