Parameters And Function Diagrams For Faults And Alarms - Siemens Sinamics S110 Function Manual

Diagnostics
5.3 Fault and alarm messages
Note
An external fault or alarm is triggered by a 1/0 signal.
An external fault and alarm do not usually mean that an internal drive message has been
generated. The cause of an external fault and warning should, therefore, be remedied
outside the drive.
5.3.4

Parameters and function diagrams for faults and alarms

Function diagrams (see SINAMICS S110 List Manual)
● 8060 Faults and alarms – fault buffer
● 8065 Faults and alarms – alarm buffer
● 8070 Faults and alarms – fault/alarm trigger word r2129
● 8075 Faults and alarms – fault/alarm configuration
Overview of important parameters (see SINAMICS S110 List Manual)
● r0944 Counter for fault buffer changes
● p0952 Fault counter
● p2100[0...19] Fault code for fault reaction selection
● r2139 Status word for faults
108
...
...
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Drive functions