Parameters, Faults And Alarms - Siemens SINAMICS G150 Operating Instructions Manual

Operation
6.11 Communication via EtherNet/IP
6.11.6

Parameters, faults and alarms

Parameters
• p0978
• p0922
• p0999[0...99] List of modified parameters 10
• p8835
• p8842
• p8940[0...239] CBE2x Name of Station
• p8941[0...3]
• p8942[0...3]
• p8943[0...3]
• p8944
• p8945
• r8950[0...239] CBE2x Name of Station actual
• r8951[0...3]
• r8952[0...3]
• r8954
• r8955[0...5]
Faults and alarms
• F08501
• A08526
• A50011
396
List of drive objects
IF1 PROFIdrive PZD telegram selection
CBE20 firmware selection
COMM BOARD activate send configuration
CBE2x IP address
CBE2x Default Gateway
CBE2x Subnet Mask
CBE2x DHCP mode
CBE2x interfaces configuration
CBE2x IP address actual
CBE2x Default Gateway actual
CBE2x DHCP Mode actual
CBE2x MAC address
PN/COMM BOARD: Setpoint timeout
PN/COMM BOARD: No cyclic connection
EtherNetIP/COMM BOARD: Configuration error
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A