Overview Of Parameters And Function Diagrams (Wv) - Siemens SINAMICS S120 Function Manual

11.12

Overview of parameters and function diagrams (WV)

Function diagrams (see SINAMICS S120/S150 List Manual)
● 2800
● 2802
● 2804
● 2806
● 2810
● 2811
● 2814
Overview of important parameters (see SINAMICS S120/S150 List Manual)
Table 11-10 Parameters for Safety Integrated Functions
Parame‐ Name
ters
p9601 SI enable safety functions
p9602 SI enable safe brake control
p9610 SI PROFIsafe address (Control Unit)
p9620 SI signal source for Safe Torque Off
p9650 SI SGE changeover, tolerance time (Motor Module)
p9651 SI STO/SBC/SS1 debounce time (Control Unit)
p9652 SI Safe Stop 1 delay time
p9658 SI transition time STOP F to STOP A
p9659 SI timer for the forced checking procedure
p9761 SI password input
p9762 SI password new
p9763 SI password acknowledgment
r9770[0... SI version safety function integrated in the drive
2]
r9771 SI shared functions
r9772 SI CO/BO: Status
r9773 SI CO/BO: Status (Control Unit + Motor Module)
r9774 SI CO/BO: Status (Safe Torque Off group)
r9780 SI monitoring clock cycle
r9794 SI crosswise comparison list
r9795 SI diagnostics for STOP F
r9798 SI actual checksum SI parameters
Drive functions
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
11.12 Overview of parameters and function diagrams (WV)
SI Basic Functions - Parameter manager
SI Basic functions - Monitoring functions and faults/alarms
SI Basic Functions - SI status CU, MM, CU+MM group STO
SI Basic Functions - S_STW1/2 safety control word 1/2, S_ZSW1/2 safety sta‐
tus word 1/2
SI Basic Functions - STO (Safe Torque Off), SS1 (Safe Stop 1)
SI Basic Functions - STO (Safe Torque Off), safe pulse cancellation
SI Basic Functions - SBC (Safe Brake Control), SBA (Safe Brake Adapter)
Safety Integrated Basic Functions
Changeable to ...
Safety Integrated commissioning (p0010 = 95)
In every operating mode
Safety Integrated commissioning (p0010 = 95)
689