Siemens Sinamics S110 Function Manual page 8

Preface
Questions about the documentation
If you have any questions (suggestions, corrections) regarding this technical documentation,
please fax or e-mail us at:
Fax
E-mail
A fax form is at the end of this document.
Internet address for SINAMICS
http://www.siemens.com/sinamics.
EC Declarations of Conformity
The EC Declaration of Conformity for the EMC Directive can be found/obtained:
● in the Internet:
● at the responsible regional office of the I DT MC Business Unit of Siemens AG
The EC Declaration of Conformity for the Low-Voltage Directive can be found/obtained
● in the Internet:
Note
When operated in dry areas, SINAMICS S devices conform to the Low Voltage Directive
73/23/EEC or 2006/95/EEC.
Note
SINAMICS S devices fulfill EMC Directive 89/336/EEC or 2004/108/EEC in the configuration
specified in the associated EC Declaration of Conformity and when the EMC installation
guideline is implemented, Order No. 6FC5297-0AD30-0⃞P⃞.
Note
The Equipment Manual describes a desired state which, if maintained, ensures reliable
operation as desired and compliance with EMC limit values.
Should there be a deviation from the Manual requirements, appropriate actions (e.g.
measurements) must be taken to check/prove that the desired reliable operation is ensured
and EMC limit values are complied with.
8
+49 9131 98 2176
mailto:docu.motioncontrol@siemens.com
http://support.automation.siemens.com
under the Product/Order No. 15257461
http://support.automation.siemens.com
under the Product/Order No. 22383669
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Drive functions