Siemens Sinamics S110 Function Manual page 483

Digital output
Figure 10-8
Properties
● Separate power supply for the digital outputs.
● Source of output signal can be selected by parameter.
● Signal can be inverted by parameter.
● Status of output signal can be displayed
Function diagrams (see SINAMICS S110 List Manual)
● 2032 digital output (DO 16)
Drive functions
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Digital output: Signal processing of DO 0
– as a binector output
– as a connector output
Note
Before the digital output can function, its own electronics power supply must be
connected.
Basic information about the drive system
10.5 Inputs/outputs
483