Profibus Components - Siemens Sinamics S110 Function Manual

Commissioning preparations for PROFIBUS

2.2 PROFIBUS components

2.2 PROFIBUS components
We recommend the following components for communication via PROFIBUS:
1. Communication modules if PG/PC interface via the PROFIBUS interface
2. Connection cable
Cable lengths
Table 2- 2
9.6 k to 187.5 k
500 k
1.5 M
3 to 12 M
40
– CP5511 (PROFIBUS connection via PCMCIA card in notebook as programming
device)
The PROFIBUS card CP5511 allows a maximum of 10 slave connections.
For larger projects (many CUs) with several drive units and thus with more than 10
PROFIBUS slaves, problems may occur with the notebook when going online with
STARTER.
Remedy: Replace interface card CP5511 with a CP5512 interface card or via menu
item "Select target system/target devices..." only select the drive units that you
actually want to work with.
– CP5512 (PROFIBUS connection via CARDBUS)
Configuration: PCMCIA type 2 card + adapter with 9-pin SUB-D socket for connection
to PROFIBUS.
For MS Windows 2000/XP Professional and PCMCIA 32 only
Order No.: 6GK1551-2AA00
– CP5611 A2 (PROFIBUS connection via short PCI card)
Configuration: Short PCI card with 9-pin SUB-D socket for connection to PROFIBUS.
Not for Windows 95/98SE
Order No.: 6GK1561-1AA01
– CP5613 A2 (PROFIBUS connection via short PCI card)
Configuration: Short PCI card with 9-pin SUB-D socket for connection to PROFIBUS.
Order No.: 6GK1561-3AA01
– between: CP 5xxx <--> PROFIBUS
Order No.: 6ES7901-4BD00-0XA0
– MPI cable (SIMATIC S7)
Order No.: 6ES7901-0BF00-0AA0
Permissible PROFIBUS cable lengths
Baud rate [bit/s] Max. cable length [m]
1000
400
200
100
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Drive functions