Measuring Sockets - Siemens Sinamics S110 Function Manual

Diagnostics
5.2 Diagnostics via STARTER
Parameterization
The "measuring function" parameter screen is selected via the following icon in the toolbar of
the STARTER commissioning tool:
Figure 5-8
5.2.4

Measuring sockets

Description
The measuring sockets are used to output analog signals. Any interconnectable signal can
be output to any measuring socket on the Control Unit.
CAUTION
The measuring sockets should be used for commissioning and servicing purposes only.
The measurements may only be carried out by properly trained specialist personnel.
Figure 5-9
98
STARTER icon for "Measuring function"
Arrangement of the measuring sockets on the Control Unit CU305
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Drive functions