Siemens Sinamics S110 Function Manual page 99

Parameterizing and using the measuring sockets
The measuring sockets are parameterized and operated via the STARTER parameterization
and commissioning tool.
Figure 5-10 "Measuring sockets" initial screen
In the STARTER commissioning tool, select the parameter screen "Measuring sockets" in
the project tree under the CU in the entry inputs/outputs in the tab Measuring sockets.
Note
Please see the online help for more information about parameterizing and operation.
Properties
• Resolution
• Voltage range
• Measuring cycle
Short-circuit-proof
Parameterizable scaling
Adjustable offset
Adjustable limitation
Drive functions
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
8-bit
0 V to +4.98 V
Depends on the measuring signal
(e.g. actual speed value in speed controller cycle 250 μs)
Diagnostics
5.2 Diagnostics via STARTER
99