Function Diagrams And Parameters - Siemens SINAMICS S120 Series Function Manual

5.10.6

Function diagrams and parameters

Function diagrams (see SINAMICS S120/S150 List Manual)
• 2381
• 2382
• 2610
Overview of important parameters (see SINAMICS S120/S150 List Manual)
• r5600
• p5602[0...1]
• p5606[0...1]
• p5611
• r5613.0...1
5.11 Messages via diagnostics channels
Messages are not just able to be displayed via the Startdrive commissioning tools. After the
activation of a diagnostic function, the messages are also transferred to the higher-level
controller via the standardized diagnostic channels. The messages are evaluated there or
forwarded for convenient display to the corresponding user interfaces (SIMATIC HMI, TIA
Portal, etc.).
In this way, problems or faults can be located immediately regardless of the tool currently
being used, and then corrected immediately.
Also note the general information on the diagnostics channels in Section Diagnostics
channels (Page 66).
Communication
Function Manual, 12/2018, 6SL3097-5BD00-0BP0
PROFIenergy - Control commands / query commands
PROFIenergy - States
Sequence control - Sequencer
Pe hibernation ID
Pe hibernation pause time, minimum
Pe hibernation duration, maximum
Pe energy-saving properties, general
CO/BO: Pe energy-saving active/inactive
Communication via PROFINET IO
5.11 Messages via diagnostics channels
161