Siemens Sinamics S110 Function Manual page 488

Basic information about the drive system
10.7 Licensing
Generating a license key via the "WEB License Manager"
The following information is required:
● Serial number for the memory card
● License number, delivery note number, and the license (on the Certificate of License)
1. Call up the "WEB License Manager".
2. Choose "Direct access".
3. Enter the license number and delivery note number of the license.
4. Enter serial number.
5. Select a product, e. g. "SINAMICS S CU3xx".
6. Choose "Available license numbers".
7. Check the assignment.
8. When you are sure that the license has been correctly assigned, click "OK".
9. The license key is displayed and can be entered.
Entering the license key
With the STARTER commissioning software, the ASCII characters are not entered in code,
but the letters and numbers in the license key can be input directly as they appear on the
license certificate.
In this case, the ASCII coding is processed by STARTER in the background.
Example of a license key:
E1MQ-4BEA = 69 49 77 81 45 52 66 69 65 dec (ASCII characters)
Procedure for entering a license key (see example):
p9920[0] = E 1st character
...
p9920[8] = A 9th character
Note
When changing p9920[x] to the value 0, all of the following indices are also set to 0.
After the license key has been entered, it has to be activated as follows:
● p9921 = 1 Licensing, activate license key
488
http://www.siemens.com/automation/license
--> Click "Next".
--> Click "Next".
--> Click "Next".
--> Click "Assign".
The parameter is automatically reset to 0
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Drive functions