Licensing - Siemens Sinamics S110 Function Manual

10.7

Licensing

Description
SINAMICS S110 requires that a license purchased specifically for this purpose is assigned
to the hardware if the extended functions of Safety Integrated are to be used. In doing this
you will receive a license key, which links the extended functions of Safety Integrated with
the hardware electronically. In order to assign the license to the hardware, you must have a
memory card (this also has to be purchased separately).
The license key is an electronic license stamp declaring that one or more software licenses
have been purchased.
Actual customer verification of the license for the software that is subject to license is called
a certificate of license.
Note
Refer to the order documentation (e.g. catalogs) for information on basic functions and
functions subject to license.
An insufficient license is indicated via the following alarm and LED on the Control Unit:
● A13000 License not sufficient
● READY LED Flashes green/red at 0.5 Hz
Properties of the license key
● Is assigned to a specific memory card.
● Saved in non-volatile memory.
● Is not transferrable.
● Can be acquired using the "WEB License Manager" from a license database.
Drive functions
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
NOTICE
The drive can only be operated with an insufficient license during commissioning and
servicing.
The drive requires a sufficient license in order for it to operate normally.
Basic information about the drive system
10.7 Licensing
487