CLEAR MEMORY MODE
Airbag System (Diagnostics)
9. Clear Memory Mode
S002513
A: OPERATION
S002513A16
1) Turn the ignition switch ON.
2) Connect the diagnosis terminal to diagnosis
connector terminal No. 2 in the driver's seat lower
cover area.
B5M0693A
3) While the warning light flashes, connect
another diagnosis terminal to diagnosis connector
terminal No.3.
4) Once the memory is erased, the warning light
returns to the normal flash rate (0.6 sec on). The
failure to recover the normal flash rate indicates
that trouble parts still remain. Having repaired such
parts, erase the memory again and confirm that the
normal flash rate has returned.
5) When the memory has been cleared, discon-
nect the diagnosis terminal from the diagnosis con-
nector.
6) Wind tape around the diagnosis terminal and
return it to its original position.
AB-23