Subaru Legacy 2002 Service Manual page 3247

Airbag System (Diagnostics)
5. Airbag Connector
A: OPERATION
1. DRIVER'S AIRBAG, PASSENGER'S
AIRBAG, SIDE AIRBAG, FRONT SUB
SENSOR HARNESS TO AIRBAG MAIN
HARNESS AND PRETENSIONER
¼ How to disconnect:
1) Push lock arm (A).
2) With lock arm (A) pushed in, move slide lock (B)
in the direction of the arrow.
3) With slide lock (B) pulled, remove lock arm (A)
to its original position, and then pull in the direction
of the arrow and separate the connector.
CAUTION:
When pulling, be sure to hold onto the connec-
tor and not the wire.
¼ How to connect:
Holding the connector, and push it in carefully until
a connecting sound is heard.
AIRBAG CONNECTOR
S002659
S002659A16
S002659A1606
B5M1153A
B5M1154
CAUTION:
Be sure to insert the connector in until it locks.
Then pull on it gently to make sure that it is
locked.
2. FRONT SUB-SENSOR, SIDE AIRBAG
SENSOR
S002659A1603
¼ How to disconnect:
1) Holding outer part (A), pull it in the direction of
the arrow.
CAUTION:
When pulling, be sure to hold onto the connec-
tor and not the wire.
AB-18
B5M1155
B5M1156A