Generator - Subaru Legacy 2004 Service Manual

Hide thumbs Also See for Legacy 2004:

Table of Contents

STARTING/CHARGING SYSTEMS

3. Generator

1) Disconnect the ground cable from battery.

2) Disconnect the connector and terminal from

• Non-turbo model

• Turbo model

3) Remove the V-belt covers.

4) Remove the front side belts.

<Ref. to ME(H4SO 2.0)-38, FRONT SIDE BELT,

REMOVAL, V-belt.> or <Ref. to ME(H4DOTC)-39,

FRONT SIDE BELT, REMOVAL, V-belt.>

5) Remove the bolts which install the generator

onto bracket.

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

Check and adjust the V-belt tension.

<Ref. to ME(H4SO 2.0)-39, INSPECTION, V-

belt.> or <Ref. to ME(H4DOTC)-40, INSPEC-

TION, V-belt.>

C: DISASSEMBLY

1) Remove the four through-bolts.

SC(H4SO 2.0)-14

m (2.5 kgf-m, 18.1 ft-lb)

Table of Contents