D-Link 5000 Series Cli Reference Manual page 498

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
no set igmp groupmembership-interval [vlan_id]
Parameters
vlan_id
Default
The default is 260 seconds.
Command Mode
•
Interface Config
•
Global Config
•
VLAN Config
5-471 set igmp maxresponse
Sets the IGMP Maximum Response time for the system, on a particular interface or VLAN, or on a range
of interfaces. The Maximum Response time is the waiting period in seconds after sending a query on an
interface because it did not receive a report for a particular group in that interface. This value must be
less than the IGMP Query Interval time value. The range is 1 to 25 seconds.
No command sets the max response time (on the interface or VLAN) to the default value.
set igmp maxresponse [vlan_id] 1-25
no set igmp maxresponse [vlan_id]
Parameters
vlan_id
Default
The default is 10 seconds.
Command Mode
•
Interface Config
•
Global Config
•
VLAN Config
5-472 set igmp mcrtrexpiretime
Set the Multicast Router Present Expiration time. The time is set for the system, on a particular interface
or VLAN, or on a range of interfaces. The range is 0 to 3600 seconds, whereas a value of 0 indicates no
expiration time.
(Optional) Indicates the VLAN identifiations.
(Optional) Indicates the VLAN identification.
492