D-Link 5000 Series Cli Reference Manual page 284

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
5-181 show sflow pollers
Display the sFlow polling instances available on the switch. Use "-" for range.
show sflow pollers
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows an example of the command.
(Switch) #show sflow pollers
Poller Data Source
------------------
0/1
Display Parameters
Poller Data Source
Receiver Index
Poller Interval
5-182 show sflow receivers
Display configuration information related to the sFlow receivers.
show sflow receivers [index]
Receiver Index Poller Interval
------------- ---------------
1 10
sFlowDataSource (slot/port) for this sFlow sampler. The agent only
supports Physical ports.
sFlowReceiver associated with the identified sFlow counter poller.
Interval period between called counter samplings associated with the
data source.
278