D-Link 5000 Series Cli Reference Manual page 113

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
no authorization network radius
Parameters
None
Default
The default is Disabled.
Command Mode
Global Config
4-122 clear radius dynamic-author statistics
This command is used to clear RADIUS dynamic authorization counters.
clear radius dynamic-author statistics
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following provides an example of the command.
(Routing)#clear radius dynamic-author statistics
Are you sure you want to clear statistics? (y/n) y
Statistics cleared.
4-123 client
This command is used to specify the IP address or hostname of the AAA server client. To configure the
server key at the client level, the optional server key keyword and string argument are used.
The no command is used to remove the configured Dynamic Authorization client in the device, as well as
the key associated with that client.
107