D-Link 5000 Series Cli Reference Manual page 549

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
(Routing)#
5-544 show lldp med interface
Use this command to display a summary of the current LLDP MED configuration for a specific interface
sot/port indicates a specific physical interface. all indicates all valid LLDP interfaces.
show lldp med interface {slot/port | all}
Parameters
slot/port
all
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows example CLI display output for the command.
(Routing)#show lldp med interface all
Interface Link
---------- -----
0/1 Down
0/2 up
0/3 Down
0/4 Down
0/5 Down
0/6 Down
0/7 Down
0/8 Down
0/9 Down
0/10 Down
0/11 Down
0/12 Down
0/13 Down
0/14 Down
TLV Codes: 0- Capabilities,
2- Location,
4- Extended Pd,
--More-- or (q)uit
Enter an interface in slot/port format.
Display LLDP MED configuration for an interface.
configMED operMED
---------- ----------
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
1- Network Policy
3- Extended PSE
5- Inventory
543
ConfigNotify TLVsTx
-------------- ----------
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1
Disabled 0,1