D-Link 5000 Series Cli Reference Manual page 372

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
dot1x eapolflood
no dot1x eapolflood
Parameters
None
Default
The default is Disabled.
Command Mode
Global Config
5-290 dot1x dynamic-vlan enable
Enable the creation of VLANs dynamically when a RADIUS-assigned VLAN does not exist in the switch.
No command prevents from the creation of VLANs when a RADIUS-assigned VLAN does not exist in the
switch.
dot1x dynamic-vlan enable
no dot1x dynamic-vlan enable
Parameters
None
Default
The default is Disabled.
Command Mode
Global Config
5-291 dot1x port-control
Set the authentication mode for the specified interface or range of interfaces. TheForce-unauthorized
configures the authenticator PAE sets the controlled port to unauthorized. The force-authorized
configures the authenticator PAE unconditionally sets the controlled port to authorized. While the auto
parameter specify the authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server. lf a mac-
based option is specified, the MAC-based dot1x authentication is enabled.
No command sets the 802.1X port control mode on the specified port to default.
dot1x port-control {force-unauthorized | force-authorized | auto | mac-based}
366