D-Link 5000 Series Cli Reference Manual page 831

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Default
The default is as follows:
•
burst-interval of 1000 msec.
•
burst-size of 100 messages
Command Mode
Global Config
8-37 show ipv6 brief
Displays the IPv6 status of the forwarding mode and the IPv6 unicast routing mode.
show ipv6 brief
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following is an example of the CLI display output for the command.
(Routing)#show ipv6 brief
IPv6 Unicast Routing Mode........................ Disable
IPv6 Hop Limit................................... 0
ICMPv6 Rate Limit Error Interval................. 1000 msec
ICMPv6 Rate Limit Burst Size..................... 100 messages
Maximum Routes................................... 4096
IPv6 Unresolved Data Rate Limit.................. 1024 pps
IPv6 Neighbors Dynamic Renew..................... Disable
IPv6 NUD Maximum Unicast Solicits................ 3
IPv6 NUD Maximum Multicast Solicits.............. 3
IPv6 NUD Exponential Backoff Multiple............ 1
Display Parameters
IPv6 Unicast Routing Mode
IPv6 Hop Limit
Shows whether the IPv6 unicast routing mode is enabled.
Shows the unicast hop count used in IPv6 packets originated by the
825