D-Link 5000 Series Cli Reference Manual page 107

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
SNMP Trap Send Port
Net-SNMP Proxy Mode
4-115 show snmp user
This command is used to show the currently configured SNMPv3 users.
show snmp user [username]
Parameters
username
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following is an example of the CLI display output for the command.
(Routing)(Routing)(Config)#show snmp user
Name Group Name
---------- ----------
Test D-Link
Test1 D-Link
Display Parameters
Name
Group Name
Auth Method
Privilege Method
Remote Engine ID
4-116 show snmp views
This command is used to show the currently configured views.
SNMP trap listening port.
The SNMP proxy mode.
(Optional) Enter the user account of an existing user.
Auth Meth Priv Meth
---------- ----------
SHA DES
Indicates the name of the user.
Indicates the group that defines the SNMPv3 access parameters.
Indicates the authentication algorithm configured for the given user.
Indicates the encryption algorithm configured for the given user.
Indicates the enginelD for the user that is defined on the client machine.
101
Remote Engine ID
-------------------------
800000ab0300a0c9000001
800000ab0300a0c9000001