D-Link 5000 Series Cli Reference Manual page 255

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
MTU
Options
Flags
Seq
LS_REQ packet field definitions:
Length
LS_UPD packet field definitions:
Length
LS_ACK packet field definitions:
Length
5-141 debug ping packet
Enable ICMP echo request and response tracing. Ping tracing of network/service port for switching
packages can be traced with this command. Pings can also be traced on specified virtual router.
No command disables ICMP echo request and response tracing.
debug ping packet [vrf vrf-name]
no debug ping packet
Parameters
vrf vrf-name
Default
The default is Disabled.
Command Mode
Privileged EXEC
MTU.
Options in the OSPF packet.
Could be one or more of the following:
•
I – lnit
•
M – More
•
MS – Master/Slave
Sequence Number of the DD packet.
Length of packet.
Length of packet.
Length of packet.
(Optional) Configure Ping Packet Debug flags of a virtual router.
249