D-Link 5000 Series Cli Reference Manual page 551

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Media Policy Application Type : streamin
Vlan ID: 20
Priority: 1
DSCP: 2
Unknown: False
Tagged: True
Inventory
Hardware Rev: xxx xxx xxx
Firmware Rev: xxx xxx xxx
Software Rev: xxx xxx xxx
Serial Num: xxx xxx xxx
Mfg Name: xxx xxx xxx
Model Name: xxx xxx xxx
Asset ID: xxx xxx xxx
Location
Subtype: elin
Info: xxx xxx xxx
Extended POE
Device Type: pseDevice
Extended POE PSE
Available: 0.3 watts
Source: primary
Priority: critical
Extended POE PD
Required: 0.2 watts
Source: local
Priority: low
5-546 show lldp med remote-device
Use this command to display the summary information about remote devices that transmit current LLDP
MED data to the system. You can show information about LLDP MED remote data received on all valid
LLDP interfaces or on a specific physical interface.
show lldp med remote-device {slot/port | all}
Parameters
slot/port
all
Enter an interface in slot/port format.
Display LLDP MED configuration for an interface.
545