D-Link 5000 Series Cli Reference Manual page 445

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
VPC config Mode.................................. Enabled
Keepalive config mode............................ Enabled
VPC operational Mode............................. Enabled
Self Role........................................ Primary
Peer Role........................................ Secondary
Peer detection................................... Disabled
Peer-Link details
--------------------
Interface........................................ 3/2
Peer link status................................. UP
Peer-link STP Mode............................... Disabled
Configured Vlans................................. 1
Egress tagging................................... none
VPC Details
--------------------
Number of VPCs configured........................ 1
Number of VPCs operational....................... 1
VPC id# 1
--------------------
Interface........................................ 3/1
Configured Vlans................................. 1
VPC Interface State.............................. Active
Local MemberPorts
-----------------
0/19
0/20
0/21
0/22
Peer MemberPorts
-----------------
0/27
0/28
0/29
0/30
5-393 show vpc consistency-parameters
Display global and LAG interface consistency parameters for virtual port channels (VPC).
show vpc consistency-parameters {global | interface id}
Status
----------
UP
UP
UP
UP
Status
----------
UP
UP
UP
UP
439