D-Link 5000 Series Cli Reference Manual page 75

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
level level
Default
The default is None.
Command Mode
Global Config
4-68 username unlock
This command is used to allow the unlocking of a locked user account. Only a Level 15 user can
reactivate a locked user account.
username name unlock
Parameters
None
Default
The default is None.
Command Mode
Global Config
4-69 show users
This command is used to display the names and setting of the configured users. Truncated user names
will be displayed by the show users command, while the show users long command can be used to
display the complete user names. Only users with Level 15 privileges can use the show users command.
Furthermore, the SNMPv3 fields will not be displayed unless SNMP is available on the system.
show users
Parameters
None
Default
The default is None.
Indicates the user level. A level 15 user may assign a level 0 value to
another user in order to suspend that user's access. The range of user
levels is 0-15.
69