D-Link 5000 Series Cli Reference Manual page 902

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Dead Time
Restart Helper Status
Restart Reason
Remaining Grace Time
Restart Helper Exit Reason
If you specify an IP address for the neighbor router, the following fields display:
Interface
Area ID
Options
Router Priority
Dead Timer Due
•
Attempt – no recent information has been received from the
neighbor but a more concerted effort should be made to contact
the neighbor.
•
lnit – an Hello packet has recently been seen from the neighbor,
but bidirectional communication has not yet been established.
•
2 way – communication between the two routers is bidirectional.
•
Exchange start – the first step in creating an adjacency between
the two neighboring routers, the goal is to decide which router is
the master and to decide upon the initial Database Description
(DD) sequence number.
•
Exchange – the router is describing its entire link state database
by sending DD packets to the neighbor.
•
Full – the neighboring routers are fully adjacent and they will
now appear in router-LSAs and network-LSAs.
The amount of time, in seconds, to wait before the router assumes the
neighbor is unreachable.
Indicates the status of this router as a helper during a graceful restart of
the router specified in the command line:
•
Helping – This router is acting as a helpful neighbor to the
specified router.
•
Not Helping – This router is not a helpful neighbor at this time.
When this router is in helpful neighbor mode, this indicates the reason
for the restart as provided by the restarting router.
The number of seconds remaining in current graceful restart interval.
This is displayed only when this router is currently acting as a helpful
neighbor for the router specified in the command.
Indicates the reason that the specified router last exited a graceful
restart.
•
None – Graceful restart has not been attempted
•
in Progress – Restart is in progress
•
Completed – The previous graceful restart completed
successfully
•
Timed Out – The previous graceful restart timed out
•
Topology Changed – The previous graceful restart terminated
prematurely because of a topology change.
The interface of the local router.
The area ID associated with the interface.
An integer value that indicates the optional OSPF capabilities supported
by the neighbor. These are listed in its Hello packets. This enables
received Hello Packets to be rejected (i.e., neighbor relationships will
not even start to form) if there is a mismatch in certain crucial OSPF
capabilities.
The router priority for the specified interface.
The amount of time, in seconds, to wait before the router assumes the
896