D-Link 5000 Series Cli Reference Manual page 99

Layer 2/3 managed 10g/25g/40g/100g data center switches
Hide thumbs Also See for 5000 Series:
Table of Contents

Advertisement

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Parameters
username
groupname
remote engineid-string
auth-md5 password | auth-
sha password
auth-md5-key md5-key
auth-sha-key sha-key
priv-des password
priv-des-key des-key
Default
The default is as follows: No users are created.
Command Mode
Global Config
4-107 snmp-server view
This command is used to create or modify an existing view entry that is being utilized by groups to
determine which objects a community or user is granted access to.
The no command is used to remove the specified view.
snmp-server view viewname [oid-tree] {included | excluded}
no snmp-server view viewname [oid-tree]
Parameters
viewname
oid-tree
included
Indicates the username under which the SNMPv3 user will connect to
the switch. The allowed range of characters is 1 to 30 characters.
Indicates the name of the group to which the user belongs. The allowed
range of characters is 1 to 30 characters.
(Optional) Indicates the engine-id of the remote management station
from which the user in question will be connecting. The allowed range of
characters is 5 to 32 characters.
(Optional) Indicate the password that the user in question will use for the
authentication or encryption mechanism. The allowed range of
characters is 1 to 32 characters.
(Optional) Indicates a pregenerated MD5 authentication key. The length
of this key will be 32 characters.
(Optional) Indicates a pregenerated SHA authentication key. The length
of this key will be 48 characters
(Optional) Indicates the user password for authentication or encryption.
The range is 1 to 32 characters.
(Optional) Indicates a pregenerated DES encryption key. The length of
this key will be 32 characters if MD5 is selected, whereas it will be 48
characters if SHA is selected.
Parameter (range: 1 to 30 characters) label for the view being created.
(Optional) Indicates the OID subtree to be included or excluded from the
view, specified numerically (1.3.6.2.4) or via keywords (system).
Indicates the included tree.
93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents