D-Link 5000 Series Cli Reference Manual page 168

Layer 2/3 managed 10g/25g/40g/100g data center switches
Hide thumbs Also See for 5000 Series:
Table of Contents

Advertisement

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
If the vlan vlan_id is entered, then only the MAC Address, interface, and Status fields will be displayed. If
the interface slot/port parameter is entered, then the VLAN ID will also appear in addition to the MAC
Address and Status fields.
The following information is displayed if the count parameter is entered:
Dynamic Address count
Static Address (User-
defined) count
Total MAC Addresses in
use
Total MAC Addresses
available
5-26
process cpu threshold
This command is used to configure the CPU utilization thresholds, with the Rising and Falling thresholds
being specified as a percentage of the CPU resources. The utilization monitoring time period must be in
multiples of 5 seconds and can be configured to be any value from 5 seconds to 86400 seconds. The
configuration of the CPU utilization threshold will be saved across any switch reboot. The configuration of
the falling utilization threshold is optional. In the event that the falling CPU utilization parameters are not
configured, then the same value used for the rising CPU utilization parameters will be used for the falling
parameters.
process cpu threshold type total rising 1-100 interval <5-86400> {[falling] 1-100 interval <5-
86400> {[falling] 1-100 interval <5-86400>}
Parameters
None
Default
The default is None.
Command Mode
Global Config
Display Parameters
rising threshold
does not fall under one of the aforementioned categories.
Indicates the number of MAC addresses in the forwarding database that
have been automatically learned.
Indicates the number of MAC addresses in the forwarding database that
have been manually entered by a user.
Indicates the number of MAC addresses currently included in the
forwarding database.
Indicates the number of MAC addresses that the forwarding database
can handle.
Indicates the percentage of CPU resources that triggers a notification
when exceeded by the configured rising interval (range: 1 to 100;
default: 0 (disabled)).
162

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents