D-Link 5000 Series Cli Reference Manual page 381

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Auth Status
Reason
5-299 show dot1x clients
Display 802.1X client information as well as information regarding the number of clients that are
authenticated.
show dot1x clients {slot/port | all}
Parameters
slot/port
all
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows an example of the command.
(Routing) #show dot1x clients all
Clients Authenticated using Monitor Mode......... 0
Clients Authenticated using Dot1x................ 0
Display Parameters
CIients Authenticated
using Monitor Mode
Clients Authenticated
using Dot1x
Logical Interface
Interface
User Name
Supplicant MAC Address
Session Time
RADIUS Assigned, or Montior Mode VLAN ID.
The authentication status.
The specified reason for a successful or faiIed authentication attempt.
Enter an interface in slot/port format.
Enter all to specify all ports.
The number of the Dot1x authenticated clients using Monitor mode.
The number of authenticated Dot1x clients using 802.1X authentication
process.
The logical port number.
The physical port associated to the supplicant.
The user name used for authenticate to the server.
The supplicant device's MAC address.
The period of time for the logged in session.
375