D-Link 5000 Series Cli Reference Manual page 900

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1560
1620
1680
1740
1800
1860
Display Parameters
Total self-originated LSAs
Average LSAs per group
Pacing group limit
Groups
8-120 show ipv6 ospf max-metric
Shows the configured maximum metrics for the stub-router mode.
show ipv6 ospf max-metric
Parameters
None
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following provides an example of the command.
(Config)#show ipv6 ospf max-metric
OSPFv3 Router with ID (3.3.3.3)
Start time: 00:00:00, Time elapsed: 00:01:05
Originating router-LSAs with maximum metric
Condition: on startup for 1000 seconds, State: inactive
1619 106
1679 111
1739 106
1799 80
1859 0
1919 0
The number of LSAs the router is currently originating.
The number of self-originated LSAs divided by the number of LSA
groups. The number of LSA groups is the refresh interval (1800
seconds) divided by the pacing interval (configured with timers pacing
lsa-group) plus two.
The maximum number of self-originated LSAs in one LSA group. If the
number of LSAs in a group exceeds this limit, OSPF redistributes LSAs
throughout the refresh interval to achieve better balance.
For each LSA pacing group, the output shows the range of LSA ages in
the group and the number of LSAs in the group.
894