D-Link 5000 Series Cli Reference Manual page 541

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
all
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows example CLI display output for the command.
(Switching)#show lldp remote-device all
LLDP Remote Device Summary
Local Interface
---------------
0/1
0/2
0/3
0/4
0/5
0/6
0/7
0/7
0/7
0/7
0/7
0/7
0/8
0/9
0/10
0/11
0/12
--More-- or (q)uit
Display Parameters
Local Interface
RemID
Chassis ID
Port ID
System Name
Enter all for all interfaces.
RemID Chassis ID
----- ------------------
2 00:FC:E3:90:01:0F
3 00:FC:E3:90:01:0F
4 00:FC:E3:90:01:0F
5 00:FC:E3:90:01:0F
1 00:FC:E3:90:01:0F
6 00:FC:E3:90:01:0F
The interface that received the LIRDPDU from the remote device.
An internal identifier to the switch to mark each remote device to the
system.
The ID that is sent by a remote device as part of the LLDP message, it
is usually a MAC address of the device.
The port number that transmitted the LLDPDU.
The system name of the remote device.
535
Port ID
------------------
00:FC:E3:90:01:11
00:FC:E3:90:01:12
00:FC:E3:90:01:13
00:FC:E3:90:01:14
00:FC:E3:90:03:11
00:FC:E3:90:04:11
System Name
---------------