D-Link 5000 Series Cli Reference Manual page 155

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Part Number
Maintenance Level
Manufacturer
Burned in MAC Address
Software Version
Operating System
Network Processing
Device
Additional Packages
5-20 show interface
This command is used to display a summary of the statistics for a given specified interface or to display a
count of all the CPU traffic based upon the argument.
show interface {slot/port | counters | dampening | debounce | ethernet | lag lag-id | loopback |
priority-flow-control | switchport | tunnel}
Parameters
slot/port
counters
dampening
debounce
ethernet
lag
loopback
priority-flow-control
switchport
tunnel
Default
The default is None.
Command Mode
Privileged EXEC
This parameter consists of the manufacturing part number.
Indicates hardware changes that are of significance to software.
This parameter consists of a description of the manufacturer.
Indicates the universally assigned network address.
Indicates the release.version.revision number of the code that is
currently running on the switch.
Indicates the operating system that is currently running on the switch.
Indicates the type of the processor microcode being used.
Indicates the additional packages that have been incorporated into this
system.
Select a slot/port interface.
Indicates the summary statistics for all ports on the switch.
Indicates the interface dampening information.
Indicates the debounce timer configuration and the current link flap
count.
Indicates statisctics for a single or all ports.
Indicates the statistics for the LAG interface.
Indicates the configured Loopback interface information.
Indicaes the Priority-Flow-Control information.
Indicates the statistics for the CPU port on the switch.
Indicates the configufed Tunnel interface information.
149